***UPDATED*** DB Technosystems Form Processor 02/09/2011

In this section you can share self-made extensions with other users of WYSIWYG Web Builder.
There is a dedicated section for commercial extensions.
User avatar
Navaldesign
 
 
Posts: 903
Joined: Sat Mar 01, 2008 8:08 pm
Location: Italy
Contact:

Post by Navaldesign » Wed Jul 14, 2010 5:40 pm

Please read above post
www.dbtechnosystems.com

User avatar
frankus
 
 
Posts: 57
Joined: Sat Dec 05, 2009 10:04 pm

Post by frankus » Wed Jul 14, 2010 5:42 pm

I put it back in error_reporting(0); and changed it to Sendmail. Then I got success page after clicking submit. But no email arrived.

User avatar
Navaldesign
 
 
Posts: 903
Joined: Sat Mar 01, 2008 8:08 pm
Location: Italy
Contact:

Post by Navaldesign » Wed Jul 14, 2010 5:48 pm

Try also SMTP, Port 25, No Authentication

Make changes and publish again
www.dbtechnosystems.com

User avatar
frankus
 
 
Posts: 57
Joined: Sat Dec 05, 2009 10:04 pm

Post by frankus » Wed Jul 14, 2010 11:27 pm

I changed smtp, port 25 leaving other things intact but after pressing submit, I saw the error page with this “##error##”

This thing is giving me real headache.

How do I make sure the "from address" field is an email address based on my domain on the server? I suspect the visitor’s email address in the web form becomes automatically the “from address” which I think some servers don’t like. The WB form does this.

User avatar
Navaldesign
 
 
Posts: 903
Joined: Sat Mar 01, 2008 8:08 pm
Location: Italy
Contact:

Post by Navaldesign » Thu Jul 15, 2010 4:22 am

Normally the user's email address IS used as "from".

There is a rather complicated way to do what you ask .

I could fix this for you, but I would need access to your hosting account. If you don't mind, you can contact me through my site contact form.
www.dbtechnosystems.com

User avatar
frankus
 
 
Posts: 57
Joined: Sat Dec 05, 2009 10:04 pm

Post by frankus » Thu Jul 15, 2010 1:11 pm

I have sent you the necessary info through your website form. Again, thanks for your continued assistance.

User avatar
frankus
 
 
Posts: 57
Joined: Sat Dec 05, 2009 10:04 pm

Post by frankus » Thu Jul 15, 2010 8:30 pm

Finally got it working :P Thanks Navaldesign!

User avatar
jerryco
 
 
Posts: 291
Joined: Fri Mar 27, 2009 2:42 pm
Location: Purmerend, Holland

Post by jerryco » Thu Jul 15, 2010 10:40 pm

Is there a way to get the value from a field named 'subject' to appear as the administrator email's subject?

So when the form would ask: Enter Subject [_________] that this subject is then used for sending the email instead of 'New Submission from our Website Form' ?

And secondly, is it possible to do the same with the fields named name and email, so that the visitor's name and email is used instead of the generic website address?


Much appreciated if this can be done (new version optionally?)
// Love is the acceptance of nothing / So, you're here. Now dance.

/ You want RWD? Rotate your damn phone! //

User avatar
docdoc
 
 
Posts: 55
Joined: Sun Jul 18, 2010 9:34 am

Post by docdoc » Mon Aug 02, 2010 6:30 pm

hi Navaldesign

does this extension work with WB7?
thanks

User avatar
Navaldesign
 
 
Posts: 903
Joined: Sat Mar 01, 2008 8:08 pm
Location: Italy
Contact:

Post by Navaldesign » Mon Aug 02, 2010 8:29 pm

Yes, It works with WB 7
www.dbtechnosystems.com

harville
 
 
Posts: 33
Joined: Fri Mar 23, 2007 3:07 am

Adding Protect Single Page causes problem

Post by harville » Tue Aug 24, 2010 3:53 am

I want to protect a page on my site with the web builder made 'Single Page Protect'. The page I need protected also includes your form extention. I wasn't able to look through all 40+ pages of comments on your extension, but I was wondering what I need to do in order to protect a page using the Single Page Protect that also includes your form extension.

After I enter the password to open the page, the page automatically redirects to the "thankyou" page, as if I had completed the form and clicked the submit button. Any suggestions? Thanks!

User avatar
Navaldesign
 
 
Posts: 903
Joined: Sat Mar 01, 2008 8:08 pm
Location: Italy
Contact:

Post by Navaldesign » Tue Aug 24, 2010 7:28 am

Assign the form an ID number, and set this ID number in the Form Processor properties.

This should do the job, and it is necessary (if you read the manual) because you have more than one forms in the page. Infact, the Single Page Protect object is a form.

Let me know if you have any issues.
www.dbtechnosystems.com

harville
 
 
Posts: 33
Joined: Fri Mar 23, 2007 3:07 am

Post by harville » Tue Aug 24, 2010 8:37 am

Ok, I gave your form extension the proper id name and followed your manual, but I'm still getting the same results.

Am I supposed to do the same with the Single Page Protect form?

When I type the password to enter the page, I get redirected to the thank you page, but if I close that page and reclick to open the page again, I see my form, but after I fill out the form and click submit, the password page opens and says the password was incorrect.

It's like both submit buttons switched what they were supposed to control.
Any ideas?

You can see what i mean by going to: http://www.thefilmuntouched.com/untouched/ and click on the button 'RSVP' on the right side of the nav bar. Thanks!

harville
 
 
Posts: 33
Joined: Fri Mar 23, 2007 3:07 am

Post by harville » Tue Aug 24, 2010 8:41 am

the password is: admin

User avatar
Navaldesign
 
 
Posts: 903
Joined: Sat Mar 01, 2008 8:08 pm
Location: Italy
Contact:

Post by Navaldesign » Tue Aug 24, 2010 10:39 am

admin is not accepted as password
www.dbtechnosystems.com

Post Reply